Hi Dave -
The C1060 is only rated to do up to 300gsm (which is usually equivalent to 111# Cover). Please check your gsm on the paper package otherwise you may get poor results. Also the trail edge of thick stock (long grain) can have issues with full bleed, try to see if you can push the image closer to the lead edge for Simplex jobs and to the center for Duplex jobs. I agree with the previous responders that you may need to change your transfer voltages for the second side with thick media.
Best regards,
------------------------------
Dennis Connolly
Specialty Products Mgr
Konica Minolta Business Solutions USA, Inc.
Placentia CA
714-296-6327
------------------------------
Original Message:
Sent: 03-14-2017 05:55 AM
From: Dave Ortolani
Subject: C1060: 6-up rack cards on 13X19
We are trying to print full bleed 4X9 rack cards 6-up on 13X19, 120# coated cover stock on our new C1060, and we are having problems with washed out printed on side 1, at the top edge of the image.
Does anyone have a) a good template for this? b) know settings to use that will make it print good quality right up to what is supposed to be only an 1/8th inch no print zone.
Thank you.