We are new to variable data mailings, when folding a mailer, we have some loss of the mailers. What is the acceptable loss count on a mailing of 2,000 to 5,000 pieces or do we need to go back and reprint the lost pieces?
Right now, my staff feels they need to go back and reprint all lost pieces which is causing time drains in the digital print room.
Thank you for the help on this issue.
Having waste is something difficult to avoid but you can learn to keep everything to a minimum. Try to keep rollers on your folders running the same stock and use same insert stations consistently. If you have enough equipment you can run things very smoothly and efficiently to keep waste to a small minimum. You'll make money knowing how fast your machines should run at all times. Even though I can fix and repair pretty much anything I've realized I can be better off spending very little on adding new machinery based on demand. Just add approx. 20 minutes per employee setup on a folder, inserter, inkjet... on per job basis. Let's say you run about 500 jobs a year through every department. That's over $3000.00 in savings/year. Time is money too you just have to do the math based on your workflow. Any YES process digital laser waste to show your integrity. You'll make our industry look good!
Maztek Direct Inc.
14039 Garfield Ave. Units F-G
Paramount CA 90723
This e-mail message and any documents attached to it are confidential and may contain information that is protected from disclosure by various federal and state laws, including the HIPAA privacy rule (45 C.F.R., Part 164). This information is intended to be used solely by the entity or individual to whom this message is addressed. If you are not the intended recipient, be advised that any use, dissemination, forwarding, printing, or copying of this message without the sender's written permission is strictly prohibited and may be unlawful. Accordingly, if you have received this message in error, please notify the sender immediately by return e-mail or call 323-786-6001, and then delete this message.
The answer to that question really depends on what your customer needs. If it is a invoice mailing then they will absolutely have to have 100% of the job mailed. If it is a marketing piece that is variable, but not really that personalized, they may accept a 1% or 2% loss rate. In my opinion you just shouldn't charge for what you don't mail. It also depend on how you are calculating your postage. If your loss rate is high enough to throw off the weight at the post office you could have some issues. In my previous job where I managed a mail shop we always reprinted damaged pieces unless we has a specific arrangement with a customer to do something different. To make it more efficient we generally did our reprints the next day for all items damaged in production on all jobs from the day before. It was our first "job" of the day. Usually we put a first class stamp on those and let our local carrier pick them up on his daily pickup. That way we didn't have to interrupt any job in the middle of production to reprint a few pieces. That and sequence number everything. You can always find a place to put a sequence number on a piece.
Carter Printing Company
804.359.9206 x 305
Senior Director Digital Print Group
Direct: (484) 690-0051 Mobile: (610) 662-5413 3100 Horizon Drive - Suite 100 - King of Prussia, PA 19406-2660 www.neopost.com
What is "acceptable" for loss or damage is all about expectations of your client. Each client is unique and so are their expectations.
In most industry situations today, 98% - 99% throughput accuracy is considered as a industry benchmark. This is NOT universal everywhere, but most clients
expect a very high level of success. In some cases, 100% is the expectation.
This all starts with your business SOP promise or guarantee to your client, at the time you are developing the client's project and understanding
their expectations. It is imperative that you provide them with your normal standard procedure and how you handle spoilage, machine jams and
other operating issues with VDP work. I can tell you that clients today expect much higher accuracy and the demands are increasing with
all the technology now available to achieve up to 100% accuracy. However, this does come with significant investment in software and hardware to achieve.
I hope this gives you some sense of what I've encountered over 20 + years with VDP.
1800 Diagonal Road, Suite 320
Alexandria, VA 22314
Code of Conduct