Open Forum

  • 1.  Correction curves on Indigo

    Posted 01-22-2018 04:04 PM
    Ran a P2P on our Indigo 5500 and read it through Curve 4. The grayscale passed but G7 slightly off. Created correction curve they looked normal, imported them into the LUTs on Indigo and it flatlined my cyan. Naturally this turned my P2P pink. Anybody have any ideas?

    ------------------------------
    Robby McRight
    Vivid Ink Graphics, Inc.
    Baton Rouge LA
    (225) 751-7297
    ------------------------------


  • 2.  RE: Correction curves on Indigo

    Posted 01-23-2018 12:37 PM
    Did you start out with linear curves in the LUTs before running the P2P?  Did you run a verification P2P after entering the curves into the LUTs?   We can help you out with any questions you have about Curve4.  If you right+click the saved calibration in the left column you can "submit for feedback" and send us all your data in one easy step.  That way we can see what you're seeing - and check if anything is off.

    ------------------------------
    Patrick Herold
    Chromix
    Seattle WA
    (206) 985-6837
    ------------------------------

    Original Message